Datalogic PowerScan PD9130 User Manual

Enter/Exit Programming Mode
Product Reference Guide 263
FUNCTION KEYS CONFIGURATION (16-KEY MODELS ONLY)
Function Keys F3 through F5 are available on 16-key models only. For more
16-key programming, see Additional Features
for 16-key models on page
268.
DEFAULT
F3 No Actions Configured
Configure Actions for F3
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
for
the Function Key you want to program. Next scan
4 digits from the Alphanumeric characters in
Appen-
dix D, Keypad .
The first digit must be 0, the second digit must be
con
figured according to the CMD_ID numbers in
Table 30 on page 260 . The third and fourth must
be zero. Confirm the inserted value by scanning the
ENTER
/EXIT bar code.
Configure Actions for F3 (16-key models only)
DEFAULT
F4 No Actions Configured
Configure Actions for F4
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
for
the Function Key you want to program. Next scan
4 digits from the Alphanumeric characters in
Appen-
dix D, Keypad
.
The first digit must be 0, the second digit must be
con
figured according to the CMD_ID numbers in
Table 30 on page 260 . The third and fourth must
be zero. Confirm the inserted value by scanning the
ENTER
/EXIT bar code
Configure Actions for F4 (16-key models only)

Datalogic PowerScan PD9130 Specifications

General

Brand	Datalogic
Model	PowerScan PD9130
Category	Barcode Reader
Language	English