Datalogic PowerScan PD9130 User Manual

References
312 PowerScan™ PD9130/PBT9100/PM9100
Bluetooth-Only Features
Bluetooth Pin Code
This option specifies the 4-character or 16-character pin code to be used
for authentication of the Bluetooth link. To set the pin code:
1. Sc
an the ENTER/EXIT PROGRAMMING MODE bar code to enter Program-
ming Mode, then enable Bluetooth Security Mode on page 235.
2. S
pecify the desired pin code length (4 or 16) by scanning the appropri-
ate bar code in Select PIN Code Length on page 235.
3. Determine the desired characters. For example, D254 or
ST
OR12345678135M.
4. Convert the characters to hexadecimal using the ASC
II Chart on the
inside back cover of this manual.
5. Go to page 235 and Scan the bar code: SET 4 CHAR PIN CODE or SET
16-CHAR PIN CODE.
6. Scan the appropriate alphanumeric characters from the keypad in
Appendix D, Keypad, representing the hexadecimal entries determined
in the steps above. You will hear a two-beep indication after the last
c
haracter.
If you make a mistake before the last character, scan the CANCEL bar code to abort
and not save the entry string. You can then start again at the beginning.
7. Scan the ENTER/EXIT PROGRAMMING MODE bar code to exit Program-
ming Mode.
Changing the pin code setting will unlink the devices. If the Automatic Configura-
tion Update is set to the default enabled setti
ng, the devices must only be relinked.
If the Automatic Configuration Update is set to the disabled setting, the Pin Code
setting must also be updated in the Base Station using Aladdin. After the Base
Station has been updated, the devices must be relinked.
Table 47. Bluetooth Pin Code Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
D254 STOR12345678135M
2
Convert the characters
to hexadec
imal
44 32 35 34 53 54 4F 52 31 32 33 34 35 36 37 38 31 33 35 4D
3 Scan ENTER/EXIT PROGRAMMING MODE
4 Scan SET Bluetooth PIN CODE
5
Scan 8 or 32
Alp
hanumeric
Characters From
Appendix D, Keypad
44323534 53544F5231323334353637383133354D
6 Scan ENTER/EXIT PROGRAMMING MODE

Datalogic PowerScan PD9130 Specifications

General

Brand	Datalogic
Model	PowerScan PD9130
Category	Barcode Reader
Language	English