Datalogic PowerScan PD9130 User Manual

Enter/Exit Programming Mode
280 PowerScan™ PD9130/PBT9100/PM9100
SET FUNCTION KEY LABELS
Set F1 Label
This item allows the user to change the default mnemonic label associated
to each individual function key. This is done by programming a short acro-
nym 4-character string to be shown in the bottom of the display. The pur-
pose of the label is to serve as an indication of the programmed function of
th
e Function Key below it.
Set F1 label
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at left
fol
lowed by 8 digits from the
Appendix D, Keypad . The
digits must be the hexadecimal ASCII representation of the
d
esired characters.
End by scanning the ENTER/EXIT bar code twice.
Set F2 Label
This item allows the user to change the default mnemonic label associated
to each individual function key. This is done by programming a short acro-
nym 4-character string to be shown in the bottom of the display. The pur-
pose of the label is to serve as an indication of the programmed function of
th
e Function Key below it.
Set F2 label
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at left
fol
lowed by 8 digits from the
Appendix D, Keypad . The
digits must be the hexadecimal ASCII representation of the
d
esired characters.
End by scanning the ENTER/EXIT bar code twice.

Datalogic PowerScan PD9130 Specifications

General

Brand	Datalogic
Model	PowerScan PD9130
Category	Barcode Reader
Language	English