Enter/Exit Programming Mode
78
PowerScan™ PD9130/PBT9100/PM9100
CODE EAN/UPC
Coupon Control
This feature is used to control the reader’s method of processing coupon
labels.
Options are:
• Allow all — allow all coupon
bar codes to be decoded
•UPC/EAN coupon decoding
• Enable only GS1 DataBar — enables only GS1 DataBar coupon decoding
To set this feature:
1. Scan the Enter/Exit bar
code.
2. Scan either the enable or disable bar co
de below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner sees only the bar code you intend to scan.
3. Complete the programming sequence by
scanning the Enter/Exit bar
code.
Coupon Control = Allow all
Coupon Control = Enable only UPC/EAN
Coupon Control = Enable only GS1 DataBar
To Next Page
Loading...
Need help?
General
