Datalogic PowerScan PD9130 User Manual

Enter/Exit Programming Mode
284 PowerScan™ PD9130/PBT9100/PM9100
Set Key Sequence Terminator
Sets the terminator for keyboard composed strings.
Set key sequence terminator
To configure this feature, scan the ENTER/EXIT PROGRAM-
MING MODE bar code above, then the bar code at left fol-
lowed by 32 digits from the Alphanumeric characters in
Appendix D, Keypad . The digits must be the hexadecimal
ASCII representation of the desired characters.
If less than the expected string of 16 characters are selected,
scan
the ENTER/EXIT bar code to terminate the string.
If the first 2 digits are 0, the feature is disabled. End by scan-
ning the ENTER/EXIT
bar code twice.

Datalogic PowerScan PD9130 Specifications

General

Brand	Datalogic
Model	PowerScan PD9130
Category	Barcode Reader
Language	English