To Next Page

To Previous Page

ENTER/EXIT PROGRAMMING MODE 1D SYMBOLOGIES

194

POWERSCAN™ PD/PM/PBT9600

Codabar Set Length 2

This feature specifies one of the bar code lengths for "Codabar Length Control" on page

193

. Length 2 is the maximum label length if in Variable Length Mode, or the second

fixed length if in Fixed Length Mode. The length includes the bar code’s start, stop,

check and data characters. The length must include at least one data character.

The length can be set from 3 to 50 characters. A setting of 00 specifies to ignore this

length (only one fixed length). See "

Set Length 2" on page 342 for more detailed pro-

gramming instructions.

Select Codabar Length 2 Setting

$CCBL2

To configure this feature, scan the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the bar

code at left followed by the digits from the Alphanu-

meric characters in Appendix G, Keypad represent-

ing your desired character(s). End by scanning the

ENTER/EXIT bar code again.

Make a mistake? Scan the CANCEL bar code to abort

and not save the entry string. You can then start

again at the beginning.

CANCEL



Length 2 = 50 (50 characters)

Datalogic PowerScan Series User Manual

Questions and Answers: