ENTER/EXIT PROGRAMMING MODE WIRELESS FEATURES
282
POWERSCAN™ PD/PM/PBT9600
WIRELESS BEEPER FEATURES
Several options are available to configure beeper behavior for RF operation.
Good Transmission Beep
Enables/disables the Good Transmission Beep indication. When enabled, a beep occurs
when a Label is correctly transmitted to the base.
Beep Frequency
Adjusts radio-specific beep indications to sound at a low, medium or high frequency,
selectable from the list below (controls the beeper’s pitch/tone).
$CBTAB00
Good Transmission Beep = Disable
Good Transmission Beep = Enable
$CBTAB01
$CBTBF00
Beep Frequency = Low
Beep Frequency = Medium
$CBTBF01
$CBTBF02
Beep Frequency = High
To Next Page
Loading...
Need help?
General
