Datalogic PowerScan Series User Manual

ENTER/EXIT PROGRAMMING MODE DISPLAY AND KEYBOARD FEATURES
274 POWERSCAN™ PD/PM/PBT9600
Set String ID
Sets the identifier of the predefined strings.
Set String Header
Sets the header of the predefined strings.
Set String ID
$CPWEB
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then scan the bar
code at left and then read 6 digits representing 3
ASCII characters from the Appendix G, Keypad.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL

0x00000000000000000000000000000000
Set String Header
$CPWED
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left, and then read 32 digits representing 16 ASCII
characters in Appendix G, Keypad.
The digits must be the hexadecimal ASCII represen-
tation of the desired characters. If less than the
expected string of 16 characters are selected, scan
the ENTER/EXIT bar code to terminate the string.
If the first 2 digits are 0, the feature is disabled. End
by scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL

0x00000000000000000000000000000000

Datalogic PowerScan Series Specifications

General

Brand	Datalogic
Model	PowerScan Series
Category	Barcode Reader
Language	English