CLEANING PROCEDURE
PRODUCT REFERENCE GUIDE
359
Cleaning Enclosure and Window Surface
• Moisten a soft cloth with a recommended cleaning solution. Be sure to apply the
solution to your cloth first. Wring excessive liquid from the cloth.
• Use the cloth to wipe down the surface of the unit. Use cotton swabs, lightly
moistened, to reach in corners and crevices.
• Use another clean dry cloth to remove any residue of the cleaning agent and
ensure the unit is dry.
PRODUCTS CHEMICAL CONTENT
Alcohol Wipes
70% Isopropyl Alcohol
Formula 409® Glass and Surface
Cleaner
n-Alkyl Dimethyl Benzyl Ammonium Chloride;
n-Propoxypropanol
Windex® Multisurface
2-Hexoxyethanol, Butoxypropanol
Clorox® Bleach;
Clorox Healthcare Bleach
Germicidal Cleaner
Diluted to reach max 0.8% of concentration
Sodium Hypochlorite;
Sodium Hydroxide
Hydrogen Peroxide
3%
100% Gentle dish soap and water
NOTE: Disinfectants may be harsh on metal. They are recommended for use
only on enclosures.
CAUTION: DO NOT spray or pour cleaner directly onto the unit.
DO NOT use solutions in their concentrated form.
DO NOT use aerosols, solvents or abrasives.
DO NOT use paper towels or rough cloths to clean windows.
NOTE: The PowerScan™ 9600 is tolerant to occasional contact to the fol-
lowing industrial fluids:
• Brake fluid (DOT3)
• Carburetor Cleaner (STP)
• Gasoline
• Motor oil (SAE30)
• Automatic Transmission Fluid (ATF)
To Next Page
Loading...
Need help?
General
