INTERKEY TIMEOUT ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
267
Interkey Timeout
The 16-key keypad has a multi-tap access to alpha characters on numeric keys. In alpha-
betic mode (entered by toggling the SHIFT key), the keys must be pressed once, twice,
or more to obtain the desired letter.
This command allows you to specify the time which occurs between a key press, and the
confirmation of the letter by the scanner (when in alpha mode). The timeout can be
configured in increments of 0.5 second.
0.5 seconds
$CPWNT00
$CPWNT01
1.0 seconds
1.5 seconds
$CPWNT02
$CPWNT03
2.0 seconds
To Next Page
Loading...
Need help?
General
