Datalogic PowerScan Series User Manual

OTHER KEYBOARD PARAMETERS ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE 81
Keyboard Numeric Keypad
This feature specifies if numeric characters will be sent using the standard keys or the
numeric keypad.
Keyboard Send Control Characters
This feature is used by USB Keyboard interfaces. It specifies how the reader transmits
ASCII control characters to the host. Reference
Appendix H Scancode Tables for more
information about control characters.
Options are as follows:
Send Ctrl+Key : ASCII characters from 00H to 0x1FH inclusive are transmitted in the
format Ctrl+Key. Special keys are available in the range from 81H to A1.
Send Ctrl+Shift+Key : The behavior is the same as above, but control keys are sent in
the format Ctrl+Shift+Keys.
Send Special Function Key : Send characters between 00H and 1FH according to the
special function key mapping table (see "
Interface Type USB-Keyboard Alt Mode" on page
392
). This is used to send keys that are not in the normal ASCII set. A unique set is pro-
vided for each available scancode set.

Keyboard Numeric Keypad = Standard Keys
$CKBKP00
$CKBKP01
Keyboard Numeric Keypad = Numeric Keypad

Keyboard Send Control Characters = Send Ctrl+Key
$CKBSC00
$CKBSC01
Keyboard Send Control Characters = Send Ctrl+Shift+Key
Keyboard Send Control Characters = Send Special Function
Key
$CKBSC02

Datalogic PowerScan Series Specifications

General

Brand	Datalogic
Model	PowerScan Series
Category	Barcode Reader
Language	English