Dell 8 User Manual

Using the System Setup Program and UEFI Boot Manager 131
Processor Settings Screen
Redundant Memory
(PowerEdge M910,
M710HD, and M600)
If a valid memory configuration is installed, you can enable
memory mirroring or spare memory. Options are Mirror
Mode, Spare Mode, and Disabled.
NOTE: M710HD systems installed with Intel
®
Xeon
®
5600
series processors support memory sparing.
Redundant Memory
(PowerEdge M910,
M905, M805, and
M605)
If a valid memory configuration is installed, you can enable
spare memory. Options are Spare Mode and Disabled.
Node Interleaving
(Disabled default)
If set to Disabled (default), NUMA is employed. If
Enabled, memory interleaving is implemented.
Memory Operating
Voltage
(Auto default)
(PowerEdge M710HD)
If set to Auto, the system sets the voltage to an optimal
value based on the capacity of the installed memory
modules. You can also set the voltage of the memory
module to a higher value (1.5 V) provided that the modules
support multiple voltages.
Option Description
64-bit Specifies if the processors support 64-bit extensions.
Core Speed Displays the core speed of the processors.
Bus Speed Displays the bus speed of the processors.
Logical Processor
(Enabled default)
If set to Enabled, both logical processors per processor core
are enabled. If set to Disabled, only one logical processor
per core is enabled.
Virtualization
Technology (Disabled
default)
NOTE: Disable this feature if your system does not run
virtualization software.
Displays when the processors support Virtualization
Technology. Enabled permits virtualization software to use
Virtualization Technology incorporated in the processor
design. This feature can only be used by software that
supports Virtualization Technology.
Option Description

Dell 8 Specifications

General

Brand	Dell
Model	8
Category	Server
Language	English