Dell 8 User Manual

132 Using the System Setup Program and UEFI Boot Manager
SATA Settings Screen (PowerEdge M610, M610x)
Adjacent Cache Line
Prefetch
(Enabled default)
Enable or disables system optimization for sequential
memory access.
Hardware Prefetcher
(Enabled default)
Enables or disables the hardware prefetcher.
DCU Streamer
Prefetcher
(Enabled default)
Enables or disables DCU streamer prefetcher.
Data Reuse Enables or disables data reuse in cache.
Execute Disable
(Enabled default)
When set to Enabled, Execute Disable Memory Protection
Technology is enabled.
Number of Cores per
Processor
(All default)
If set to All, all cores in each processor are enabled.
Intel<R> QPI
Bandwidth Priority
Sets the bandwidth priority to compute.
Turbo Mode If supported by the processor(s), enables or disables Tu rbo
Mode.
C States (Enabled
default)
When set to Enabled, the processor(s) can operate in all
power states.
Processor X Family-
Model-Stepping
Displays the family and model number of each processor. A
submenu displays the core speed, the amount of cache
memory, and the number of cores of the processor(s).
Option Description
Embedded SATA
(ATA Mode default)
ATA Mode enables the integrated SATA controller. Off
disables the controller.
Port A
(Auto default)
Auto enables BIOS support for the device attached to
SATA port A. Off disables BIOS support for the device.
Port B
(Auto default)
Auto enables BIOS support for the device attached to
SATA port B. Off disables BIOS support for the device.
Option Description

Dell 8 Specifications

General

Brand	Dell
Model	8
Category	Server
Language	English