860-00186-00 Rev J
Digital Ally Inc.| DVM Operation
4.12 Uploading Files into VuVault
Option 1: SD Card
The SD card can be removed from the DVM-800 and inserted into an
appropriate memory card adapter. When the DVM is powered off or in standby,
remove the external SD card and replace it with a new external SD card, or
upload the event files from the original external SD card into VuVault and re-
install the card when finished.
Do not remove the SD card while the DVM is recording. Please consult the VuVault User’s Guide
for upload instructions. If the DVM is powered on, All 3 LED’s will flash rapidly whenever the SD
card is removed.
Option 2: Wi-Fi
A properly configured USB Wi-Fi dongle provides automated file transfer via 802.11(n)
through your wireless access point and network. After successfully uploading
recorded events from the SD card, the DVM will automatically delete the files. A green
status indicator can be seen on the LCD screen while the DVM is actively transferring
video files to your computer.
A VuVault Wireless Server must be configured to use the wireless transfer
feature (see Section 7 and the “VuVault Wireless Server Setup Guide” for setup instructions).
4.13 Event Id Information Entry
The default setting on your new DVM-800 is not to prompt the user to input any event ID information
screens after a recorded event. You may choose to enable profiling input data using the VuVault back-
office software device configuration.
The following Profile screens are available: Event ID Type, Ethnicity, Gender, Age, and Incident Number.
The Event ID Type selection criteria is configured by your VuVault system administrator, while the other
profiling screens have predetermined selection criteria. For help creating Event ID’s, consult the VuVault
Administrator Guide.
When the entry screens appear, use the and buttons to scroll through the list to highlight the
desired selection and press the Ms to make the selection. Press the Ms again to save the setting. When
SAVE is selected, the next input screen will appear or exit if it is the last screen being displayed.
To Next Page
Loading...
Need help?
General
