Ducati Hypermotard User Manual

Other functions
UP-MAP Function
This function is used to provide a user's interface
while the Performance calibration is downloaded
from the UP-MAP device (key) to the engine control
unit during Performance exhaust kit (part no.
96480031A) and Performance silencer kit (part no.
96480051A) assembling.
Note
Performance exhaust kit (part no. 96480031A)
and Performance silencer kit (part no. 96480051A)
can be purchased at a Ducati Dealer or authorized
Service Center.
Attention
To fit Performance exhaust kit (part no.
96480031A) and Performance silencer kit (part no.
96480051A) contact a Ducati Dealer or authorized
Service Center.
The UP-MAP device can be used only with powered
vehicle (key-on) and engine off. When the UP-MAP is
connected to the vehicle, these conditions are
checked and, if they are all verified, the UP-MAP,
engine control unit and instrument panel will start
communicating. The presence of the UP-MAP is
notified by the “UP-MAP CONNECTED” indication
displayed on the instrument panel.
Fig 76
134

Ducati Hypermotard Specifications

General

Transmission	6-speed
Frame	Tubular steel trellis frame
Engine Type	L-twin, 4 valves per cylinder, Desmodromic, liquid cooled
Torque	71 lb-ft (96 Nm) @ 7, 250 rpm
Front Brake	2 x 320mm semi-floating discs, radially mounted Brembo Monobloc 4-piston calipers
Rear Brake	245mm disc, 2-piston caliper