Ducati Hypermotard User Manual

Gear change pedal
When released, the gear change pedal automatically
returns to rest position N in the center. This is
indicated by the instrument panel light N coming on.
The pedal can be moved:
-
down = press down the pedal to engage the 1
st
gear and to shift down. The N light will go out;
-
upwards= lift the pedal to engage 2
nd
gear and
then 3
rd
, 4
th
, 5
th
and 6
th
gears.
Each time you move the pedal you will engage the
next gear.
Fig 97
N
1
6
5
4
3
2
Fig 98
153

Ducati Hypermotard Specifications

General

Transmission	6-speed
Frame	Tubular steel trellis frame
Engine Type	L-twin, 4 valves per cylinder, Desmodromic, liquid cooled
Torque	71 lb-ft (96 Nm) @ 7, 250 rpm
Front Brake	2 x 320mm semi-floating discs, radially mounted Brembo Monobloc 4-piston calipers
Rear Brake	245mm disc, 2-piston caliper