EasyManuals Logo

Ducati Hypermotard User Manual

Ducati Hypermotard
227 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #218 background imageLoading...
Page #218 background image
Electrical system
Basic electric items are:.
Headlight with:
low/high beams: bulb H4 blue vision (12V – 60/55W);
parking light: no. 8 LEDs;
Electrical controls on handlebars.
Turn indicators:
front: bulb type GE 2641A 12VRY10W;
rear: bulb type GE 2641A 12VRY10W.
Horn.
Brake light switches.
Battery , 12V-10 Ah, dry.
GENERATOR 14V-490W.
ELECTRONIC VOLTAGE REGULATOR, protected
with a 30 A fuse located close to the rear fuse box
(C, Fig 159).
Starter motor: 12V-0.7 kW.
Tail light:
parking light: 6 LEDs (0.4W -13.5V);
stop light: 6 LEDs (2.7W-13.5V).
Number plate light:
bulb: C5W (12-5W).
Note
For bulb replacement instructions, please read
"Replacing the high and low beam bulbs".
Fuses
There are thirteen fuses that protect the electric
components, located inside the front and rear fuse
boxes, and one on the electric solenoid starter. There
is a spare fuse in every box.
Refer to the table below to identify the circuits
protected by the various fuses and their ratings.
217

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ducati Hypermotard and is the answer not in the manual?

Ducati Hypermotard Specifications

General IconGeneral
Transmission6-speed
FrameTubular steel trellis frame
Engine TypeL-twin, 4 valves per cylinder, Desmodromic, liquid cooled
Torque71 lb-ft (96 Nm) @ 7, 250 rpm
Front Brake2 x 320mm semi-floating discs, radially mounted Brembo Monobloc 4-piston calipers
Rear Brake245mm disc, 2-piston caliper

Related product manuals