Ducati Hypermotard User Manual

Top-ups
TOP-UPS TYPE
Fuel tank, including a reserve of 1.05 gal
(4 cu. dm (liters))
Unleaded fuel with a minimum octane rat-
ing of RON 95.
4.22 gal (16 cu.dm lit-
ers)
Lubrication circuit SHELL - Advance 4T Ultra
0.87 gal (3.3 cu.dm lit-
ers)
Front/rear brake and clutch circuits SHELL Advance Brake DOT 4 -
Protectant for electric contacts SHELL Advance Contact Cleaner -
Front fork SHELL Advance Fork 7.5 or Donax TA 34.23 cu in - 561 cc
(right leg)
26.17 cu in - 429 cc (left
leg)
Important
Do not use any additives in fuel or lubricants. Using them could result in severe damage of the engine
and motorcycle components.
Attention
The vehicle is compatible only with fuel having a maximum content of ethanol of 10% (E10).
Using fuel with ethanol content over 10% is prohibited. Using it could result in severe damage of the engine
and motorcycle components. Using fuel with ethanol content over 10% will render the Warranty null and
void.
210

Ducati Hypermotard Specifications

General

Transmission	6-speed
Frame	Tubular steel trellis frame
Engine Type	L-twin, 4 valves per cylinder, Desmodromic, liquid cooled
Torque	71 lb-ft (96 Nm) @ 7, 250 rpm
Front Brake	2 x 320mm semi-floating discs, radially mounted Brembo Monobloc 4-piston calipers
Rear Brake	245mm disc, 2-piston caliper