EasyManuals Logo

Ducati Hypermotard User Manual

Ducati Hypermotard
227 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #172 background imageLoading...
Page #172 background image
Moving off
1)
Disengage the clutch by squeezing the clutch
lever.
2) Push down the gear change lever firmly with the
tip of your foot to engage first gear.
3) Raise the engine revs by turning the throttle
twistgrip while gradually releasing the clutch
lever. The motorcycle will start moving off.
4) Release the clutch lever completely and
accelerate.
5) To shift up, close the throttle to slow down
engine, disengage the clutch, lift the gear change
lever and let go of clutch lever.
To shift down, proceed as follows: release the
twistgrip, pull the clutch lever, shortly speed up to
help gears synchronize, shift down (engage next
lower gear) and release the clutch.
The controls should be used correctly and with
promptness. When riding uphill do not hesitate to
shift down as soon as the motorcycle tends to slow
down. This will avoid undue stress on the engine and
motorcycle.
Attention
Avoid harsh accelerations, as this may lead to
misfiring and transmission snatching. The clutch
lever should not be pulled longer than necessary after
gear is engaged or else friction parts may overheat
and wear out.
Attention
Prolonged rearing could deactivate the ABS
system.
171

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ducati Hypermotard and is the answer not in the manual?

Ducati Hypermotard Specifications

General IconGeneral
Transmission6-speed
FrameTubular steel trellis frame
Engine TypeL-twin, 4 valves per cylinder, Desmodromic, liquid cooled
Torque71 lb-ft (96 Nm) @ 7, 250 rpm
Front Brake2 x 320mm semi-floating discs, radially mounted Brembo Monobloc 4-piston calipers
Rear Brake245mm disc, 2-piston caliper

Related product manuals