Ducati Hypermotard User Manual

Front brake lever
Pull in the lever (1) towards the twistgrip to operate
the front brake. The system is hydraulically operated
and you just need to pull the lever gently. The control
lever features a dial adjuster (2) for lever distance
from the twistgrip on handlebar adjustment. To adjust
it, keep lever (1) fully extended, and turn knob (2),
turning it in correspondence of one of the four
foreseen positions. Keep in mind that position no. 1
corresponds to the maximum distance between the
lever and the twistgrip, whereas position no. 4
corresponds to the minimum distance.
Attention
Set front clutch lever when motorcycle is
stopped.
1 2
Fig 95
151

Ducati Hypermotard Specifications

General

Transmission	6-speed
Frame	Tubular steel trellis frame
Engine Type	L-twin, 4 valves per cylinder, Desmodromic, liquid cooled
Torque	71 lb-ft (96 Nm) @ 7, 250 rpm
Front Brake	2 x 320mm semi-floating discs, radially mounted Brembo Monobloc 4-piston calipers
Rear Brake	245mm disc, 2-piston caliper