Viewing the Status Display
109
You can monitor the projector's status and view error information from the
status display.
a
Turn on the projector.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Management menu and press [Enter].
d
Select Display Status and press [Enter].
e
Press the left or right arrow buttons to view different categories of
information.
gg Related Links
• "Projector Status Display Messages" p.109
Projector Status Display Messages
Categories on the status display let you view information about the projector
and its operation. See the Supplemental Guide for Display Status Menu for
details.
a
Status messages are available only in English.
System category: Displays the system status.
Information Description
<1/3> Displays the main status.
System Status Displays the operating status of the system.
Laser Status Displays the operating status of the light source.
Last Event Displays the latest warnings or errors.
Intake Air Temp Displays the air intake temperature.
Internal Temp Lv Displays the projector's internal temperature in five levels.
<2/3> Displays the operation time and light source information.
Operation Time Displays the projector's total operation time.
Laser Op. Time Displays the total operation time of the laser light source.
<3/3> Displays the status of the current input source.
Source Displays the current source.
Signal Status Displays the identification results of signals.
Resolution Displays the resolution.
Refresh Rate Displays the refresh rate and scanning method.
ColorSamp./Depth Displays the color sampling and bit depth.
Color Space Displays the color space.
Dynamic Range Displays the dynamic range.
Video Range Displays the video range.
Frame Interp. Displays the status of Frame Interpolation.
To Next Page
Loading...
Need help?
General
