Epson EH-LS12000B User Manual

Viewing the Status Display
110
Version category: Displays the serial number and firmware version.
Information Description
Serial Number Displays the serial number.
Main Displays the main version information.
Video2 Displays the embedded software version.
Sub Displays the embedded software version.
HDMI Displays the embedded software version.
Pixel Shift Displays the embedded software version.
Network Wired category: Displays the wired network status.
Information Description
Projector Name Displays the name used to identify the projector when
connected to a network.
Connection Mode Displays the connection path for a wired network.
DHCP Displays the DHCP settings.
IP Display Displays the IP address display settings.
IP Address Displays the IP address.
MAC Address Displays the MAC address.
Input Signal category: Displays the signal status of the current input source.
Information Description
<1/3> -
Sync Detect(5V) Displays the detection results of signals.
Signal Status Displays the identification results of signals.
Resolution Displays the resolution.
Refresh Rate Displays the refresh rate and scanning method.
ColorSamp./Depth Displays the color sampling and bit depth.
Information Description
Color Space Displays the color space.
Dynamic Range Displays the dynamic range.
Video Range Displays the video range.
HDCP Status/Ver Displays the HDCP status and version.
Trans. Type Displays the transmission method.
Stable Time Displays the amount of operating time since the signal
changed.
<2/3> -
Signal Mode Displays the signal mode.
AVI VIC/Chk.Sum Displays the VIC code and checksum for AVI InfoFrame.
CLK-MHz/Frame-Hz Displays the actual measurement value of the pixel clock
frequency and refresh rate.
Total-H/V Displays the total number of pixels and lines including the
number of effective pixels and blanking.
Sync Polarity Displays the sync polarity of the horizontal and vertical
sync signals.
EDID Mode Displays the EDID mode.
Equalizer Level Displays the equalizer level.
<3/3> -
Audio Type Displays the audio signal type input to the source device
from the HDMI port.
Audio Freq/Depth Displays the audio signal frequency and bit depth input to
the source device from the HDMI port.
GCP A/V Mute Displays the A/V Mute status of GCP packets.
DDC Status Displays the source device and DDC communication
status.
gg Related Links
• "Getting the Latest Version of the Documents" p.7

Epson EH-LS12000B Specifications

General

Brand	Epson
Model	EH-LS12000B
Category	Projector
Language	English