Epson EH-LS12000B User Manual

Installing the Safety Wire
19
c
Loop the safety wire through the carabiner on the ceiling mount, and
attach both ends to the carabiner on the projector.
d
Tighten the carabiner lock.
gg Related Links
• "Getting the Latest Version of the Documents" p.7
When Using the Ceiling Mount ELPMB30
You can attach a safety wire to your projector for increased safety as shown.
Before you start, make sure you have firmly installed the projector plate for
the ELPMB30 ceiling mount on the projector and have the following items
that are included in the safety wire set:
• Safety wire × 1
• Carabiner × 2 (Only one carabiner is used for the ELPMB30.)
• Wire clamp × 1
• Attaching screw (M4 × 10 mm) × 1
a
For details on installing the ELPMB30, see the ELPMB30 User's Guide.
a
Attach the wire clamp to the carabiner, and then use the screw to fix
the wire clamp to the screw into the wire clamp fixing point on the
projector.

Epson EH-LS12000B Specifications

General

Brand	Epson
Model	EH-LS12000B
Category	Projector
Language	English