Attaching and Removing the Cable Cover
26
You can attach the cable cover that came with your projector to hide the
attached cables from view (EH‑LS12000B).
a
Turn the projector upside down.
b
Pass a commercially available cable tie through the cable holder and tie
the cables together.
Caution
Do not bundle the power cord to the other cables. Otherwise, a fire may
occur.
c
Place the cable cover on the projector as shown, guiding the cables
through the notch on the base of the cable cover.
a
Attach the cable cover by lifting it up slightly, and then tilting it
down so that the cable cover screws fit into the holes on the
projector.
To Next Page
Loading...
Need help?
General
