Epson EH-LS12000B User Manual

Solving HDMI Link Problems
118
If you cannot operate the connected devices using the HDMI Link features,
try the following steps until the problem is solved.
a
Make sure the cable meets the HDMI CEC standard.
b
Make sure the connected device meets the HDMI CEC standard. See
the documentation supplied with the device for more information.
c
Check if the device is available in the Device Connections list.
If the device does not appear in the Device Connections list, it does not
meet the HDMI CEC standards. Connect a different device.
s Signal I/O > HDMI Link > Device Connections
d
Check that all cables required for HDMI Link are securely connected.
e
Make sure the connected devices are turned on and in standby status.
See the documentation supplied with the device for more information.
f
If you connect a new device or change the connection, set the CEC
function for the connected device again and restart the device.
gg Related Links
• "Input Signal Settings - Signal I/O Menu" p.77
• "Operating the Connected Devices Using the HDMI Link Features" p.60

Epson EH-LS12000B Specifications

General

Brand	Epson
Model	EH-LS12000B
Category	Projector
Language	English