Related tasks
Setting Up the Printer After Transport
Setting Up the Printer After Transport
Follow these steps to set up the printer after moving it. See the Start Here sheet for detailed information.
1. Verify that the location is suitable for installation.
2. Install the waste ink tube and the waste ink bottle.
3. Connect the power cable to an electrical outlet and turn on the printer.
4. Perform a nozzle check and confirm that there are no clogged nozzles.
5. Align the print head and check the print quality.
Parent topic: Moving or Transporting the Printer
Related tasks
Performing a Nozzle Check
Aligning the Print Head
128
To Next Page
Loading...
Need help?
General