• Check your wired LAN router or access point to see if the LED for the port to which your printer is
connected is on or flashing. If the link LED is off, try the following:
• Make sure the Ethernet cable is securely connected to your printer and to your router, access point,
switch, or hub.
• Try connecting your printer to a different port or a different router, access point, switch, or hub.
• Try connecting with a different Ethernet cable.
• Try printing to your printer from another computer on the network.
Parent topic: Solving Printing Problems
Print Head Moves But Nothing Prints
If the print head is moving and nothing prints, try these solutions:
• Print a nozzle check pattern. If the pattern does not print correctly, clean the print head again. (If the
printer has not been used for a long time the nozzles may be clogged.)
• Clean the suction cap and perform a medium level cleaning on all nozzles; watch the waste ink tube to
make sure that ink is flowing during the cleaning process.
Parent topic: Solving Printing Problems
Related tasks
Adjusting the Height of the Platen
Cleaning the Suction Cap
Performing a Nozzle Check
146
To Next Page
Loading...
Need help?
General