Basic Printing
Refer to these sections to learn how to perform basic print functions.
Overview of the Printing Process
Required Equipment
Pre-treating a T-shirt
Preparing Your Printer
Creating Your T-shirt Design
Loading the T-shirt
Starting and Cancelling Printing
Post-treating a T-shirt
Overview of the Printing Process
This section explains the basic workflow from preparing a T-shirt for printing to post-treatment after
printing.
1. Preparing the Required Equipment
Prepare the equipment you need for printing.
2. Pre-treating the T-shirt
When printing with White ink (White Edition), apply pre-treatment solution to the T-shirt before printing
and make sure the pre-treatment solution is completely dry before printing. If the T-shirt is creased,
use a heat press to smooth it.
3. Preparing the Printer
Turn on the printer and make sure it is functioning properly.
4. Creating Your Garment Design
Create the data you want to print and use the Garment Creator software to send it to the printer.
5. Loading the T-shirt (Media)
Load the T-shirt into the printer.
6. Printing
Check that the start light is on before you start printing.
7. Removing the T-shirt
24
To Next Page
Loading...
Need help?
General