Starting a Print Job
Cancelling a Print Job
Parent topic: Basic Printing
Starting a Print Job
When the printer has finished receiving data, the start light turns on and you can start the print job.
1. Check that the T-shirt is loaded correctly.
2. Make sure the start light is on.
3. Press the start button.
Note: If you press the maintenance button while the start light is on, you can select Nozzle
Check or Cleaning without cancelling the print job. If you select Nozzle Check from the menu, the
check pattern is printed at the platen size displayed on the LCD screen.
Parent topic: Starting and Cancelling Printing
Related topics
Loading the T-shirt
Cancelling a Print Job
You can cancel a print job or cancel data that is being received by the printer using the printer's control
panel.
Note: You cannot cancel printing from the Garment Creator software once the computer has finished
sending data to the printer. See the Garment Creator online help for more details.
1. Press the cancel button on the printer's control panel.
2. Press the up or down arrow button to highlight Yes, and press the OK button.
Printing stops immediately and data is deleted.
Note: If you are transmitting data from a USB memory device or printing from the USB File List
menu on the control panel, you can print the same data continuously after the specified number of
copies have been printed. To print different data, press the cancel button to cancel the data
received by the printer.
Parent topic: Starting and Cancelling Printing
52
To Next Page
Loading...
Need help?
General