Rev. A Features and General Specifications 1-5
TM-U200 Series (Type A/AM) Technical Manual
Confidential
Paper
Paper types: Paper roll:Plain paper or pressure-sensitive paper
Paper roll width: 76 ± 0.5 mm (2.99 ± .020")
Paper roll maximum
diameter:
83 mm (3.27")
Paper roll core: Because the standard version of this printer is not equipped with a
mechanism that detects the amount of roll paper remaining (near-
end detector), paper rolls in which the paper roll core and paper
are attached to each other by tape or glue may jam. Because the
core will jam the paper guide, preventing paper from feeding
through. Make sure to detect the amount of roll paper remaining
with the optional near-end detector, or confirm the end mark of
the paper and change the paper with a new one when the paper is
attached in the core by tape or glue is used.
Normal paper: Thickness:1 sheet:0.06 to 0.085 mm (.0024 to .0034")
Weight:52.3 to 64 g/m
2
(13.9 to 17 lb)
(45 to 55 kg/1000 sheets/1091 x 788)
Pressure-sensitive paper Original sheet + up to 1 copy sheet
Thickness:1 sheet: 0.05 to 0.08 mm (.0020 to .0031")
Total thickness: 0.2 mm (.0079") or less
Recommended paper: Mitsubishi - carbonless paper (blue)
Top and middle sheets:N40Hi
paper thickness: 0.06 mm (.0024")
weight: 47.2 g/m
2
(12.6 lb)
Bottom sheet:N60
paper thickness: 0.08 mm (.0031")
weight: 68.0 g/m
2
(18.1 lb)
To Next Page
Loading...
Need help?
General