3.
4.
5.
6.
7.
8.
9.
10.
1.
2.
PD and pupillary height
Select the desired step for input of the PD and pupillary height.
Pattern slack to be read
Weak slack
Major slack (from 0 to 1 mm)
Boxing cross
Activated
Deactivated
Warning message on import of a current Tess job (if the Tess connection is activated)
Activated
Deactivated
Activation or deactivation of Tess tracer connection
Connection deactivated by default
Working mode
Select the default working mode:
tracing - tracing
+ Tracing - centering
Lens blocking
Select the lens blocking mode:
in the boxing center
in the optical center
Zoom
The work area is scale 1:1 by default in the centering screen.
The work area is in zoom mode by default in the centering screen.
Once the modification is made, press to return to the work screen.
b. Decentration mode
This menu enables you to select a default input mode for decentration data.
To reach this menu from your working screen, select > > > .
The following screen is displayed:
Boxing mode (½ PD + Boxing Height)
The wearer's pupillary height is calculated in relation to the lowest point on the frame.
To Next Page
Loading...
Need help?
General
