5
4
3
2
1
5
5
4
3
2
1
5
1.
2.
Press to return to the work screen.
c. Control and calibrate the blocker
Calibration
Calibration check
Calibration
Select > > > on the working screen.
Take off the reflectors.
Select the “calibration” function.
Position the posiblock and click on.
Press to return to the work screen.
Correct result.
A malfunction was detected, a message appears indicating that a calibration technician is necessary: contact your
technical department.
A Pop-up is displayed:>
Once it’s finished, the following screen is displayed:>
To Next Page
Loading...
Need help?
General
