Environment (p.148)
General features (p.148)
“Tracer centering device blocker” function (p.148)
“Edger” function (p.149)
Environment
To install your digital machine and to profit from its utmost precision, it is necessary that you have a stable work surface, isolated from shocks and oscillations, perfectly
horizontal and at a proper height (approximately 70 cm).
The temperature and the humidity of the room where you use your machine must be within the following ranges of values:
Operation:
temperature between +10°C and +40°C
Humidity: between 30% and 75%
Storage:
temperature between -5°C and 50°C
Humidity: between 25% and 95%
Altitude: < 2,000 m
Level of pollution: 2
Avoid sudden changes in temperature and humidity and install your system:
in an area not directly exposed to sunlight
away from all heat sources
away from all strong magnetic fields
away from all chemical products, corrosive vapours and liquids
Take care not to block the vents and to leave enough space above the device. Do not place any object on the device. Avoid exposing the device to vibrations or shocks.
The back of your machine must be at least 20 cm away from a wall.
General features
Networking possibility:
PC
Essibox
RS232C, RJ45 and RS485 ports
Integrated auto-maintenance functions (self-calibration, autotests)
Dimensions: L 550, D 500, H 580 mm
Size of colour touch screen: 8.4 inches
Weight: 57 kg
Power supply: 220-240V – 50/60 Hz or 100-120V – 50/60 Hz
Power consumption: 1350 W – 10 A for 230 V and 15 A for 115 V
“Tracer centering device blocker” Function
Centering-blocking mode: boxing center (by default); optical center
Automatic initialization
Optical tracing:
tracing of tinted lenses
automatic tracing pattern, demo lens, recut lens in 2 dimensions
pre-positioning of drill-holes and their settings on a demo lens or a recut lens
recut lens: equivalent sphere [- 1D; +1D]
The lenses with an infra-red filter cannot be read.
Manual centering:
single vision lenses: using focimeter dots or re-marked micro-engravings
progressive lenses: using re-marked micro-engravings or manufacturer markings
bifocal and trifocal lenses
executive lenses
To Next Page
Loading...
Need help?
General
