Edit Audio Mode
When the Edit Audio mode is activated, some specific functions are available from the console:
A. Advanc(e)
The A. Advanc(e) function is used to advance the beginning of the audio transition for the selected
playlist element.
See sections "Using the Audio Split Mode" on page 195 and "Advancing or Delaying a Transition in Audio
Split Mode" on page 202.
A. Delay
The A. Delay function is used to delay the beginning of the audio transition for the selected playlist
element.
See sections "Using the Audio Split Mode" on page 195 and "Advancing or Delaying a Transition in Audio
Split Mode" on page 202.
A. Fx Dur
The A. Fx Dur function is displayed in place of the Fx Dur function when the Edit Audio mode is
activated.
This function allows you to define a duration of the audio transition effect different than the video
transition duration for the selected playlist element (audio split).
See sections "Using the Audio Split Mode" on page 195 and "Extending or Reducing a Transition in Audio
Split Mode" on page 196.
Swap
The Swap function is available with the key combination SHIFT + Swap when the Edit Audio mode has
been activated.
The Swap key activates the Swap mode from which you can select the audio tracks to be swapped or
muted.
See section "Swapping or Muting Audio Tracks from the Remote Panel" on page 210.
194| January 2022 | Issue 1.4.G
To Next Page
Loading...
Need help?
General
