Edit Video Mode
When the Edit Video mode is activated, some specific functions are available from the console:
V. Advanc(e)
The V. Advanc(e) function is used to advance the beginning of the video transition for the selected
playlist element.
See sections "Using the Audio Split Mode" on page 195 and "Advancing or Delaying a Transition in Audio
Split Mode" on page 202.
V. Delay
The V. Delay function is used to delay the beginning of the video transition for the selected playlist
element.
See sections "Using the Audio Split Mode" on page 195 and "Advancing or Delaying a Transition in Audio
Split Mode" on page 202.
V. Fx Dur
The V. Fx Dur function is displayed in place of the Fx Dur function when the Edit Video mode is
activated.
This function allows you to define a duration of the video transition effect different than the audio
transition duration for the selected playlist element (audio split).
See sections "Using the Audio Split Mode" on page 195 and "Extending or Reducing a Transition in Audio
Split Mode" on page 196.
Limitation
When the loaded playlist element has a speed = 0%, the following functions are not displayed: A.
Advance, A.Delay, A. Fx Dur, V. Advance, V.Delay, V. Fx Dur.
UsingtheAudioSplitMode
About Audio Split
The Audio Split mode makes it possible to:
• Apply transition effect durations which are different on the audio and video tracks. See section
"Extending or Reducing a Transition in Audio Split Mode" on page 196.
USER MANUAL
LSM-VIA |7. Working with Playlists| 195
To Next Page
Loading...
Need help?
General
