EasyManuals Logo
Home>FAAC>Control Unit>SDK EVO

FAAC SDK EVO Instructions

FAAC SDK EVO
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
34
E1SL 43 532258 04 - Rev. E
14:30
PSW
0000
ESC
OK
MODFUN
Translation of the original instructions
EN GL IS H
NIGHT
PSW
MANUAL
PSW
MENU
PSW
HOME PAGE
- name of the door (e.g. A1400 AIR)
- current day and date, or people counting (if SAFE FLOW is ena-
bled)
- operating mode (MODFUN)
- time
PASSWORD
HOME PAGE
The 4 buttons activate the commands associated with the icons above:
= sets the NIGHT mode
N = sets MANUAL mode
= accesses the MENU in order to configure all the board parameters
= switches to MODFUN: additional operating modes
Each time the NIGHT or MANUAL button is pressed, the mode is
enabled (icon highlighted on the display) and disabled.
Every time it is changed, the mode that is enabled is immediately
updated on the display.
Symbols on the HOME PAGE:
current indications
T
TIMER active
SDK EVO locked
USER PASSWORD disabled
RESET  LOCK/RELEASE
2-button combinations on the HOME PAGE:
+ ( 5 s)
LOCK / UNLOCK Press for approximately 5 s to Lock/Release
the keypad (the icon appears)
N + ( 5 s)
RESET (press for approximately 5 s, until the flashing Error
message disappears. After a series of screens it reverts to
the HOME PAGE)
PASSWORD PSW
When the PASSWORD screen appears, a 4-digit password must be
entered. There are 2 passwords: USER PSW and TECHNICIAN PSW. By
default, both are: 0000.
The technician password gives access to the restricted functions
(PROGRAMMING), but also to those of the user.
No password is required to select the NIGHT, MANUAL or MODFUN
operating modes via a button.
Entering the PSW
- select (
) and confirm (OK) each digit of the PSW in succession
- the device recognises the USER PSW or TECHNICIAN PSW
If a PASSWORD IS NOT RECOGNISED“WRONG PASSWORD” appears on the display. Press
OK to go back to the HOME PAGE.
Changing the PSW:
/PASSWORD
Changing the PSW is recommended when you carry out program-
ming for the first time.
- select and confirm the password to be modified: USER PSW or TECHNICIAN PSW
- select (
) and confirm (OK) the digits of the PSW one by one, then confirm the
complete PSW
Default password:
0000
A1400 AIR
THUR 20/03/14
AUTO BIDIR TOTAL
N
USER without PSW without PSW PSW*
w i t h o u t
PSW
INSTALLER without PSW without PSW PWD
w i t h o u t
PSW
* the TECHNICIAN PSW is required to access the programming func-
tions in the MENU

Table of Contents

Other manuals for FAAC SDK EVO

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FAAC SDK EVO and is the answer not in the manual?

FAAC SDK EVO Specifications

General IconGeneral
BrandFAAC
ModelSDK EVO
CategoryControl Unit
LanguageEnglish

Related product manuals