Feasa 10-F User Manual

FEASA LED ANALYSER
FUNCTIONAL VERSION
Daisy Chain Mode
BusGet#### - Activate a LED Analyser
Transmit Receive
busget#### OK
Where:
#### represents the Serial Number of the Analyser.
Description
This command will activate the LED Analyser with the specified Serial Number.
This command should be preceded by a BusFree command. All the Capture, Set, Get, etc
commands can now be used with the active Analyser in the chain.
It is the responsibility of the Controlling Computer to issue commands and monitor the
responses. If an Analyser does not respond within 500mSec then the Controlling Computer
should issue a new BusFree command and report an error.
Example:
The PC transmits BusGet#### to the Master LED Analyser to instruct it to activate the LED
Analyser with Serial Number ####.
busgetF044
OK
Back to Index
107

Feasa 10-F Specifications

General

Brand	Feasa
Model	10-F
Category	Measuring Instruments
Language	English