Feasa 10-F User Manual

FEASA LED ANALYSER
FUNCTIONAL VERSION
User Calibration Mode
getcalibrationdate Get the Calibration Date set by the user.
Description:
This command will allow the user to interrogate the Led Analyser to return the actual USER
Calibration Date in the format dd/mm/yyyy. This is the date set by the user for a specific cal
version.
Example:
Connect the Analyser to the Terminal Window and using the getcalibrationdate command, read
the data for that Led. Type the command getcalibrationdate and the analyser will respond
with with the user calibration date in the format dd/mm/yyyy
getcalibrationdate
21/01/2015
Back to Index
73

Feasa 10-F Specifications

General

Brand	Feasa
Model	10-F
Category	Measuring Instruments
Language	English