FEASA LED ANALYSER
FUNCTIONAL VERSION
Sequence Capture Mode
CaptureSequence - Start the Captures
Transmit Receive
Capturesequence or CS OK
Description
This command starts the sequence capture function. The LED Analyser will capture and store
the Intensity results of each capture up to the number of captures specified by the
setsequencenumber### or putsequencenumber### command.
The execution time for this command will depend on the time set for each capture, the wait
time between captures and the number of captures.
Example:
The PC transmits capturesequence or cs to the LED Analyser to instruct it to begin capturing
data. The LED Analyser will return a string OK to the PC.
cs
OK
Back to Index
85
To Next Page
General
