1.2 Installing the Drum/Toner Cartridge 17
1.2 Installing the Drum/Toner Cartridge
When handling the drum/toner cartridge, take note of the following points:
WARNING
• Never throw a drum/toner cartridge into an open flame. Toner remaining in the cartridge
can cause an explosion and you can get burnt.
• Do not subject it to direct sunlight or strong light.
• When installing the drum/toner cartridge, select a location not subject to strong light and
try to finish the installation within 5 minutes.
• Do not touch the surface of the photosensitive drum. Do not let the drum/toner cartridge
stand or place it upside down. The drum might get damaged.
• A drum shutter protects the photosensitive drum from light. Do not open the drum shutter.
• Although the toner is not harmful to the body, wash it off immediately if your hands or
clothes are stained with it.
• It is recommended to use up the drum/toner cartridge within 1 year after opening it.
1. Open the front cover while pressing the
front cover open/close levers of the printer.
Important
• Do not touch any parts inside the printer.
2. Hold both sides of the top cover by the grip
and open it slowly.
3. Take the drum/toner cartridge out of the
box and shake it 7 to 8 times as shown in
the diagram.
To Next Page
Loading...
Need help?
General
