5.2 Loading Paper 57
6. Turn the paper size dial to match the size of
the loaded paper.
7. Close the lid of the paper tray and push the
tray completely into the printer.
Important
• The lid of the tray must be firmly closed. If not, the
paper might become misaligned.
• When the paper tray is extended, close the lid of the
extendable part.
Note
• Do not insert the paper tray from the back side of the
printer. Doing so may damage the tray.
• If A3 or B4 size paper is output, pull out the extension
output tray.
Loading Paper on Bypass Tray
On the bypass tray, you can set the various types of paper such as transparencies,
envelopes, or labels. The following procedure explains how to load paper on the bypass
tray.
1. Open the bypass tray holding the
depressed area and pulling out and down
as shown in the diagram.
To Next Page
Loading...
Need help?
General
