Fuji Xerox DocuPrint M355df User Manual

Chapter 3 Image Quality Troubleshooting
3.2 Image Quality Troubleshooting
3-38
IQ-18 The top and side margins are incorrect
Possible causative parts
- IIT ASSY (PL21.1.14)
- DADF ASSY (PL21.1.1)
- KIT DADF PICK UP MODULE (PL21.1.95)
- Drum Cartridge [XERO ASSY] (PL8.1.1)
- Transfer Unit [ROLL ASSY-TRANS CRU] (PL6.1.1)
- ROS ASSY (PL2.1.1)
Step Check and Action Yes No
1
Checking the error mode.
Does the error occur only during copying?
Go to step 2. Go to step 7.
2
Checking the error mode.
Does the error occur when feeding the original at the DADF?
Go to step 4. Go to step 3.
3
Checking the original setting.
Is the original set to the platen glass correctly?
Replace the IIT
ASSY (REP
21.1).
Reseat the origi-
nal.
4
Checking the original setting.
Does the original meet DADF spec?
Go to step 5.
Use the platen
mode or change
the paper type.
5
Checking the DADF Guides setting.
Reseat the DADF Guides.
Does the error still occur when copying?
Go to step 6. End of work.
6
Checking the KIT DADF PICK UP MODULE.
Are there any damages or foreign substances on the KIT
DADF PICK UP MODULE?
Remove the for-
eign substances
or replace the
KIT DADF PICK
UP MODULE.
Replace the
DADF ASSY.
(REP 21.1).
7
Checking the printing.
Checked by [CE-Mode] - [Printer Diag] - [Test Print] -
[Gradation] in diagnosis.
Is the image printed correctly?
Printing data is
incorrect, then
check the print-
ing data which
the problem gen-
erated.
Go to step 8.
8
Checking after replacing the Drum Cartridge.
Replace the Drum Cartridge.
Is the image printed correctly?
End of work. Go to step 9.
9
Checking after replacing the Transfer Unit.
Replace the Transfer Unit.
Is the image printed correctly?
End of work.
Replace the
ROS ASSY.
(REP 2.1)

Fuji Xerox DocuPrint M355df Specifications

General

Brand	Fuji Xerox
Model	DocuPrint M355df
Category	Printer
Language	English