Chapter 6 General
6.4 Service Mode
6-36
6.4.6.2 Fax/Scanner Diag
Table 6-29 Function Names and Descriptions (Fax/Scanner)
Function Description See
Board Test
(Board
Diag)
All Test
Continually performs the Fax Memory, Fax Card
I/F, AFE Serial I/F, IIT I/F, and ASIC tests.
6.11.1
Fax Memory
Test
Fax Flash W/R
Test
Performs the read/write test of the Flash Mem-
ory for Fax.
6.11.2
SRAM W/R Test
Performs the read/write test of the SDRAM for
FAX.
I/F Test
Performs a communication test between Fax
Card, AFE, and IIT.
6.11.3
ASIC Test Performs the ASIC built-in test of IJAC/JBIG. 6.11.4
Relay/Signal
Test
Relay Test
Toggles the Relay signal at the specified fre-
quency.
6.11.5
Hook Test
Toggles the Hook signal at the specified fre-
quency.
Single Tone
Send
Continuously sends the tone of the selected fre-
quency.
DTMF Send Continuously sends the DTMF signal.
Dial Pulse Send
Sends the multi-digit Dial Pulse (10/20pps) sig-
nal.
Ring Back Tone Sends the ring back tone.
Data Send
Checks the outgoing data at the specified speed
and pattern. (no pattern for V. 34)
Line Voltage Checks the status of the Line Voltage.
Line Current Checks the status of the Line Current.
Information Scan Counter Displays the value of the scan counter. 6.12.1
To Next Page
Loading...
Need help?
General
