Chapter 6 General
6.2 Tools/Service Consumables/Consumables
6-23
6.2 Tools/Service Consumables/Consumables
6.2.1 Tools
There are no tools unique to this model.
(Basic Tool)
6.2.2 Service Consumables
There are no service consumables unique to this model.
Whenever special consumables for the machine are required, it will be notified in a separate technical infor-
mation document.
6.2.3 Consumables
Generally, consumables are to be replaced by the customer. It may be necessary to replace consumables for
recovery from or for insolation of faults due to consumables.
*1: This kit consists of Fusing Unit 110V, Transfer Roll (BTR), and Retard Roll (for Standard 250 Sheet Tray).
*2: This kit consists of Fusing Unit 220V, Transfer Roll (BTR), and Retard Roll (for Standard 250 Sheet Tray).
When a message appears on the LCD panel indicating that a fusing unit or transfer roll reaches its usable life-
span, follow the following steps:
1 Replace the Fusing Unit, Transfer Roll, and Retard Roll using the Maintenance KIT.
2 Press the System button on the operator panel.
3 Enter the Maintenance mode from Admin Menu.
表6-27
Product Name
Destina-
tion
Product
Code
Replace-
ment Life
(reference)
CRUM
Installed
Counter
Reset
Remarks
Toner Cartridge 355 (Standard
Capacity)
ENG/FXK/
FXTW
CT201937 4.0KPV Yes
Auto
Reset
CRU
Toner Cartridge 355 (Standard
Capacity)
FXCL CT201939 4.0KPV Yes
Auto
Reset
CRU
Toner Cartridge 355 (High Capac-
ity)
ENG/FXK/
FXTW
CT201938 10KPV Yes
Auto
Reset
CRU
Toner Cartridge 355 (High Capac-
ity)
FXCL CT201940 10KPV Yes
Auto
Reset
CRU
Drum Cartridge 355 APO/GCO CT350973 100KPV Yes
Auto
Reset
CRU
Maintenance KIT 110V
*1
APO/GCO EL300843 100KPV No Yes CRU
Maintenance KIT 220V
*2
APO/GCO EL300844 100KPV No Yes CRU
To Next Page
Loading...
Need help?
General
