Chapter 6 General
6.4 Service Mode
6-35
Installation
Serial No.
Displays or changes a six-digit serial number (numbers
of 0 through 9 and upper case alphabets of A through
Z).
6.8
HexDump Displays or changes whether to enable HexDump.
Tone Correction
(IOT tone correction)
Displays or changes whether to enable the IOT tone
correction.
Pixel Counter Displays the pixel count of the last page.
Configuration
Displays or changes the dip switch values on the NVM
of the ESS.
Meter Type
Displays or changes the Meter Type information cur-
rently set.
Print Counter Displays the current counter value.
Copy Counter M to B
Copies the Master NVM values of the ESS to the
Backup NVM.
Copy Counter B to M
Copies the Backup NVM values of the ESS to the Mas-
ter NVM.
Clear All NVM Initializes the NVM (EEPROM) of the ESS.
Clear Job History Clears the job history.
Clear Auditron PV
Clears the Auditron PV data such as billing counter,
user account, and restriction information.
Clear Device Data Deletes all data in the devices (EEPROM).
Test Print
Pattern IOT
Prints the IOT built-in test pattern 600dpi. (checks the
printing function of the IOT)
6.9Gradation
Prints the pattern containing patches of different densi-
ties ranging from 0 through 100%. (ESS built-in test pat-
tern)
Ghost Chart
Prints the chart for checking ghost. (ESS built-in test
pattern)
Parameter
Regi
Displays or changes the registration adjustment values
currently set.
6.10.1
Life Displays or initializes the life counter value of the IOT. 6.10.2
Print
Prints the parameter values held in the IOT (registration
setting values and life counter value).
6.10.3
Exit Mode Complete Exit
Exits the CE mode and restarts the printer (same as
power on).
6.4.4
Table 6-28 Function Names and Descriptions (Printer Diag)
Function Description See
To Next Page
Loading...
Need help?
General
