9Problem Solving
176
Problem Solving
9
Troubleshooting
This section describes what to do when an error occurs on the machine.
Take proper action according to the following procedures for troubleshooting.
If the machine does not operate normally even if you follow the troubleshooting below,
contact your Fuji Xerox Customer Support Centre.
Power is not turned on.
Action Refer to "General Trouble" (P.177).
No Yes
Touch screen is not bright
enough.
Action Refer to "General Trouble" (P.177).
No Yes
Message is displayed.
Action Refer to "General Trouble" (P.177).
No Yes
Image Quality Problems
Action Refer to "Image Quality Problems" (P.178).
No Yes
Jam Problems
Action Refer to "Jam Problems" (P.182).
No Yes
Trouble during Copying/Scan-
ning
Action Refer to "Trouble during Copying/Scanning" (P.183).
No Yes
Trouble during Printing
Action Refer to "Trouble during Printing" (P.184).
Yes