Fujitsu 1FINITY L100 User Manual

4.10
Install Blade in Housing
Prerequisites:
■ The 1FINITY Housing must be installed.
■ Verify power terminal adapter (AC00-SD11) is not installed on the rear of the blade.
■ The slot in the 1FINITY Housing where the blade is installed has power.
■ Screwdriver set (including straight-slot and Phillips head)
Danger: The blade is heavy and should be handled carefully. Do not use the ber management arms to li
and install the blade. Doing so may damage the blade, causing the blade to fall and personal injury. When
liing or installing, posion two hands in the center of the blade to avoid dropping the blade.
Step 1
Insert the blade into the appropriate slot of the 1FINITY Housing and slide it back unl it locks in place.
Note: Fujitsu recommends installing the blade without the PIUs installed.
Aenon: When liing or installing, posion two hands in the center of the blade to avoid dropping
the blade.
Equipment Installation
Install Blade in Housing
136
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only

Fujitsu 1FINITY L100 Specifications

General

Brand	Fujitsu
Model	1FINITY L100
Category	Server
Language	English