Fujitsu 1FINITY L100 User Manual

RADIUS is a remote authencaon method which allows users to provision user account informaon (username
and passwords) for authencaon on a server external to the network element. It provides the ability for users
to log accounng informaon (for example: login me and IP) on an external server.
Note: For more detailed RADIUS informaon, refer to 1FINITY RADIUS User Guide, available on the Fujitsu
Partners website, hps://partners.fnc.fujitsu.com/documentaon.
1.7.5
REST API
The 1FINITY REST API web service allows users or soware systems to interact with and congure the 1FINITY
system through a YANG-data-model-based REST API. The REST API web service is disabled by default and uses
the HTTP/HTTP web server service.
Note: For more detailed REST API informaon, refer to 1FINITY REST API User Guide, available on the Fujitsu
Partners website, hps://partners.fnc.fujitsu.com/documentaon.
1.7.6
Secure Shell
SSH is a client-server network protocol for secure communicaon sessions between hosts over TCP/IP network
connecons. 1FINITY NEs can parcipate as either client or server. The SSH server service is enabled by default
and listens on TCP port 22. The TCP port is congurable. CLI uses the SSH server service.
1.7.7
Streaming Telemetry
1FINITY devices support streaming telemetry. Streaming telemetry provides a periodic push mechanism to send
operaonal state data from a network element to a monitoring server (network management system). A simple
conguraon mechanism consists of uploading a conguraon le that describes the desnaon(s) (for example,
address and port), and separate command le(s) which consist of NETCONF XML get requests for data of
interest. The command les can select the enre tree or focus on a parcular monitoring point.
Note: For more detailed streaming telemetry informaon, refer to 1FINITY Telemetry User Guide, available on
the Fujitsu Partners website, hps://partners.fnc.fujitsu.com/documentaon.
1.7.8
Syslog (RFC 5424)
Syslog is a standard protocol used to send event nocaon messages to a logging server. Syslog is enabled by
default on 1FINITY NEs to capture logs generated by dierent applicaons. Syslog uses the standard BSD syslog
protocol, specied in RFC 3164. The logs cover informaon, for example, login success/failures, cong change
nocaons, and applicaon errors.
System Description and Engineering
System and Network Services
52
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only

Fujitsu 1FINITY L100 Specifications

General

Brand	Fujitsu
Model	1FINITY L100
Category	Server
Language	English