Fujitsu 1FINITY L100 User Manual

Set WebGUI Service Timeout
By default, the WebGUI service meout is set to 30 minutes.
Command:
% set system services web-server webgui-timeout <nYnMnDnHnMnS>
6.15.5
Log On NE with WebGUI
Before a user can log on the NE using the WebGUI, the NE HTTP/HTTPS server service must be enabled, the NE
WebGUI service must be enabled, the NE must be available on the network, and the user must know the NE IP
address and have login credenals (username and password).
1. Open a web browser.
2. In the address box of the web browser, enter one of the following IP addresses:
http://<ip_address>
https://<ip_address>
The WebGUI login screen appears.
Figure 99
Log On Screen
3. Enter username and password.
System Administration
Web Services
249
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only

Fujitsu 1FINITY L100 Specifications

General

Brand	Fujitsu
Model	1FINITY L100
Category	Server
Language	English