Fujitsu 1FINITY L100 User Manual

The 1FINITY NEs support syslog ltering, saving syslogs to local syslog les, and sending syslogs to the remote
syslog server. The ltering can be done based on facility and severity. When the ltered syslogs are saved locally,
a maximum of four such les can be created.
Note: For more detailed syslog informaon, refer to 1FINITY Syslog User Guide, available on the Fujitsu Partners
website, hps://partners.fnc.fujitsu.com/documentaon.
1.7.9
Zero Touch Provisioning
Zero Touch Provisioning (ZTP) allows 1FINITY NEs to be autocongured by a controller when the device is rst
installed. ZTP eliminates the need for the installaon technician to connect to the device and manually congure
it.
Aer hardware is installed, the installaon technician connects the NE to the DCN. ZTP, using a standard DHCP
server service, announces the NE to one or more controllers. The controllers get a REST nocaon that
idenes the network element. With this informaon, the controller can associate the NE to a conguraon
prole and automacally congure the NE.
All network communicaon is fully secure. The announcement method allows the controller to discover the NE
automacally.
Note: For more detailed ZTP informaon, refer to 1FINITY Zero Touch Provisioning User Guide, available on the
Fujitsu Partners website, hps://partners.fnc.fujitsu.com/documentaon.
1.7.10
Access Control List
Access Control List (ACL) is used for packet ltering that controls the Internet Protocol (IP) trac passing through
a network. A set of rules is dened in the ACL to decide whether the IP trac is allowed or denied. 1FINITY ACL
supports both IPv4 and IPv6 addresses to allow or deny IP trac.
Note: For more detailed ACL informaon, refer to 1FINITY Access Control List User Guide, available on the
Fujitsu Partners website, hps://partners.fnc.fujitsu.com/documentaon.
1.7.11
Telnet
Telnet is a client-server network protocol for text-oriented communicaon between hosts over TCP/IP network
connecons. 1FINITY NEs can parcipate as either client or server.
1.7.12
Terminal Access Controller Access-Control System Plus
System Description and Engineering
System and Network Services
53
Release 19.1.1 · Issue 1.1, May 2021
Fujitsu and Fujitsu Customer Use Only

Fujitsu 1FINITY L100 Specifications

General

Brand	Fujitsu
Model	1FINITY L100
Category	Server
Language	English